Différences

Ci-dessous, les différences entre deux révisions de la page.

--- maison2:configuration_open_wrt:wzr-hp-g300nh [01/2012] – [test] fred
+++ maison2:configuration_open_wrt:wzr-hp-g300nh [04/2012] – fred
@@ Ligne 1: / Ligne 1: @@
   * http://www.materiel.net/routeur-adsl/buffalo-technology-wzr-hp-g300nh-55100.html
   * http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h
-:-hi 100 WL500GP : nouveau transfo 2.5A 5V au moins
 ====== INSTALL ======
+backfire 10.03.1
   * __ce qui manque a LUCI :__ explorateur de fichier (file editor)
@@ Ligne 12: / Ligne 11: @@
       * backdoor terminal
       * webcam
+===== ping: sendto: Network is unreachable =====
+je comprend pas pourquoi mais en configurant l'IP statique j'ai cette erreur .
-__notes__
+si on configure le routeur en client DHCP , le routeur arrive a se connecter a l'internet
-  * http://wiki.openwrt.org/doc/howto/luci.essentials mod_simple_vhost ?
+<code>
+IPv4 WAN Status
+br-lan			Type: dhcp
+Address: 192.168.0.11
+Netmask: 255.255.255.0
+Gateway: 192.168.0.254
+DNS 1: 192.168.0.254
+Expires: 23h 46m 51s
+Connected: 0h 13m 9s
+</code>
+c’était les mêmes paramètre en static ...
+le patch accept_ra 1 ne semble pas fonctionner :
+config interface lan
+    option accept_ra 1
  =====  Web CAM Logitech QCCommunicate STX =====
@@ Ligne 145: / Ligne 159: @@
 ==== motion ====
 Jan 12 21:45:30 Buffalo user.err syslog: [1] Unable to find a compatible palette format.
 Jan 12 21:45:30 Buffalo user.debug syslog: [1] Using VIDEO_PALETTE_YUV420P palette
@@ Ligne 151: / Ligne 166: @@
 Jan 12 21:45:32 Buffalo user.err syslog: [1] Video device fatal error - Closing video device
+=== http://ubuntuforums.org/showthread.php?t=1476423 ===
 LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so /usr/bin/motion
+[0] Processing thread 0 - config file /etc/motion.conf
+[0] Motion 3.2.11.1 Started
+[0] Thread 1 is from /etc/motion.conf
+[1] Thread 1 started
+[1] cap.driver: "STV06xx"
+[1] cap.card: "Camera"
+[1] cap.bus_info: "usb-ar71xx-ehci-1"
+[1] cap.capabilities=0x05000001
+[1] - VIDEO_CAPTURE
+[0] motion-httpd/3.2.11.1 running, accepting connections
+[0] motion-httpd: waiting for data on port TCP 8080
+[1] - READWRITE
+[1] - STREAMING
+[1] Supported palettes:
+[1] 0: RGB3 (RGB3)
+[1] 1: BGR3 (BGR3)
+[1] 2: YU12 (YU12)
+[1] Selected palette YU12
+[1] index_format 8 Test palette YU12 (320x240)
+[1] Using palette YU12 (320x240) bytesperlines 320 sizeimage 115200 colorspace 00000008
+[1] found control 0x00980900, "Brightness", range 0,31
+[1]     "Brightness", default 3, current 3
+[1] found control 0x00980901, "Contrast", range 0,15
+[1]     "Contrast", default 11, current 11
+[1] found control 0x00980910, "Gamma (software)", range 500,3000
+[1]     "Gamma (software)", default 1000, current 1000
+[1] found control 0x00980911, "Exposure", range 0,1023
+[1]     "Exposure", default 256, current 256
+[1] found control 0x00980912, "Auto Gain (software)", range 0,1
+[1]     "Auto Gain (software)", default 1, current 1
+[1] found control 0x00980913, "Gain", range 0,255
+[1]     "Gain", default 64, current 64
 [1] mmap information:
 [1] frames=4
@@ Ligne 161: / Ligne 209: @@
 [1] V4L capturing using read is deprecated!
 [1] Motion only supports mmap.
+[1] Could not fetch initial image from camera
+[1] Motion continues using width and height from config file(s)
+[1] Resizing pre_capture buffer to 1 items
+[1] Started stream webcam server in port 8081
 [1] Retrying until successful connection with camera
-[1] cap.driver: "STV06xx"
-===== ping: sendto: Network is unreachable =====
+LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so /usr/bin/motion
-je comprend pas pourquoi mais en configurant l'IP statique j'ai cette erreur .
+[0] Processing thread 0 - config file /etc/motion.conf
+[0] Motion 3.2.11.1 Started
+[0] Thread 1 is from /etc/motion.conf
+[1] Thread 1 started
+[1] cap.driver: "STV06xx"
+[1] cap.card: "Camera"
+[1] cap.bus_info: "usb-ar71xx-ehci-1"
+[1] cap.capabilities=0x05000001
+[1] - VIDEO_CAPTURE
+[1] - READWRITE
+[1] - STREAMING
+[1] Supported palettes:
+[0] motion-httpd/3.2.11.1 running, accepting connections
+[0] motion-httpd: waiting for data on port TCP 8080
+[1] 0: RGB3 (RGB3)
+[1] 1: BGR3 (BGR3)
+[1] 2: YU12 (YU12)
+[1] Selected palette YU12
+[1] index_format 8 Test palette YU12 (320x240)
+[1] Using palette YU12 (320x240) bytesperlines 320 sizeimage 115200 colorspace 00000008
+[1] found control 0x00980900, "Brightness", range 0,31
+[1]     "Brightness", default 3, current 3
+[1] found control 0x00980901, "Contrast", range 0,15
+[1]     "Contrast", default 11, current 11
+[1] found control 0x00980910, "Gamma (software)", range 500,3000
+[1]     "Gamma (software)", default 1000, current 1000
+[1] found control 0x00980911, "Exposure", range 0,1023
+[1]     "Exposure", default 256, current 256
+[1] found control 0x00980912, "Auto Gain (software)", range 0,1
+[1]     "Auto Gain (software)", default 1, current 1
+[1] found control 0x00980913, "Gain", range 0,255
+[1]     "Gain", default 64, current 64
+[1] mmap information:
+[1] frames=4
+libv4l2: error allocating conversion buffer
+[1] Error mapping buffer 0 mmap: Cannot allocate memory
+[1] Using VIDEO_PALETTE_YUV420P palette
+[1] Using V4L1
+[1] Resizing pre_capture buffer to 1 items
+[1] Started stream webcam server in port 8081
+[1] sync error in proc 22284: Invalid argument
+[1] mcapture error in proc 22284: Invalid argument
+[1] Video device fatal error - Closing video device
+[1] Closing video device /dev/video0
+[1] Retrying until successful connection with camera
+=== next ===
+  * http://www.lavrsen.dk/foswiki/bin/view/Motion/SupportQuestion2010x05x08x221414
+  * http://www.lavrsen.dk/foswiki/bin/view/Motion/SupportQuestion2009x01x20x183230
+:-nst __patcher motion :__ mais tester la [[http://sourceforge.net/projects/motion/files/motion%20-%203.2/|version 3.2.12]] avant, actuellement 3.2.11.1-1
+  * http://www.lavrsen.dk/foswiki/bin/view/Motion/Libv4lConvert
+  * compile de la version actuel
+    * a partir du la racine du SDK :
+<code> svn export svn://svn.openwrt.org/openwrt/packages/multimedia/motion package/motion </code>
+      * make package/motion/compile
+      * make package/index
-si on configure le routeur en client DHCP , le routeur arrive a se connecter a l'internet
-<code>
-IPv4 WAN Status
-br-lan			Type: dhcp
-Address: 192.168.0.11
-Netmask: 255.255.255.0
-Gateway: 192.168.0.254
-DNS 1: 192.168.0.254
-Expires: 23h 46m 51s
-Connected: 0h 13m 9s
-</code>
-c’était les mêmes paramètre en static ...
-le patch accept_ra 1 ne semble pas fonctionner :
-config interface lan
-    option accept_ra 1

Accueil domotique Blog

Outils pour utilisateurs

Outils du site

Différences

Outils de la page

Accueil

domotique

Blog