flashage avec le trx "openwrt-xwrt_kamikaze8.09_RC1_brcm-2.4extra_squashfs.trx" a partir de l'interface webif
<code>
Upgrading firmware, please wait ... 

Unlocking linux ...
Erasing linux ...
Writing from /tmp/firmware.bin to linux ... 
</code>
j'ai attendue 10 minutes

connection en telnet sur 192.168.1.1
<code>
  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 KAMIKAZE (8.09, r13132) ----------------------------

yes! ca à fonctionné 

df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                    2.0M      2.0M         0 100% /
/dev/root                 2.0M      2.0M         0 100% /rom
tmpfs                    14.9M     88.0k     14.8M   1% /tmp
mini_fo:/tmp/root         2.0M      2.0M         0 100% /tmp/root
/dev/mtdblock/4           5.3M    328.0k      4.9M   6% /jffs
mini_fo:/jffs             2.0M      2.0M         0 100% /
</code>

====== LAN configuration ======
<code>
etc/config/network
config interface lan
      option type     bridge
      option ifname   "eth0.0"
      option proto    static
      option ipaddr   192.168.0.1
      option netmask  255.255.255.0
      option gateway  192.168.0.254
      option dns      80.118.192.111
</code>

====== webif : system_setting ======
__timezone__ :
  * timezone.cfg029fc0.posixtz=CET-1CEST,M3.5.0,M10.5.0/3
  * timezone.cfg029fc0.zoneinfo=Europe/Paris
__webif__ :
  * webif.general.lang=fr
====== vsftpd ======
<code>
#opkg install vsftpd
==============================================
=== etc/vsftpd.conf                         ==
==============================================
background=YES
listen=YES
anonymous_enable=NO
local_enable=YES
write_enable=YES
local_umask=022
check_shell=NO
#dirmessage_enable=YES
ftpd_banner=Welcome to blah FTP service.
secure_chroot_dir=/var/run      <=============ligne a ajouter
session_support=NO
#syslog_enable=YES
#userlist_enable=YES
#userlist_deny=NO
#userlist_file=/etc/vsftpd.users
#xferlog_enable=YES
#xferlog_file=/var/log/vsftpd.log
#xferlog_std_format=YES
</code>

====== script command ======

[[maison2:configuration_open_wrt:remote_shell]] 
<code>
root@OpenWrt:/www/cgi-bin/webif# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                    2.0M      2.0M         0 100% /
/dev/root                 2.0M      2.0M         0 100% /rom
tmpfs                    14.9M    776.0k     14.2M   5% /tmp
/dev/mtdblock/4           5.3M    404.0k      4.9M   8% /jffs
mini_fo:/jffs             2.0M      2.0M         0 100% /
</code>

====== Bouton pour activer le wifi ======
<code>
BUTTON    Event 
RESTORE   reset  
EZSETUP   ses 

mkdir -p /etc/hotplug.d/button
wget -O /etc/hotplug.d/button/01-wifitoggle "http://wiki.openwrt.org/OpenWrtDocs/Customizing/
Software/WifiToggle?action=AttachFile&do=get&target=wifitoggle.hotplug1"

dans /etc/hotplug.d/button/01-wifitoggle
. /lib/config/uci.sh
. /etc/functions.sh

config_load "wifitoggle"
local section="cfg022c70"
config_get      "BUTTON_NAME" "$section" "button"
config_get_bool "seen" "$section" "seen" '0'

toggle_radio() {
	local section="$1"
	config_get "WIFI_RADIOSTATUS" "$section" "disabled"

	case "$WIFI_RADIOSTATUS" in
		0|"")
			uci_set "wireless" "$section" "disabled" "1"
			uci_commit "wireless"
			echo 0 >> /proc/diag/led/power    <=============ligne a ajouter
			wifi
		;;
		1)
			uci_set "wireless" "$section" "disabled" "0"
			uci_commit "wireless"
			echo 1 >> /proc/diag/led/power    <=============ligne a ajouter
			wifi
		;;
	esac
}

if [ "$BUTTON" = "ses" ]; then    <=============ligne a modifier
	if [ "$ACTION" = "pressed" ] ; then
		config_load "wireless"
		config_foreach toggle_radio wifi-device
	fi
fi
</code>

====== FIN ======
__l'installation d'OWFS posait probleme car :__
  * ERROR: Cannot satisfy the following dependencies for owfs:
  * kernel (=2.4.34-brcm-1) *  :=>: he oui le kernel a changé en 8.09RC1 :=>: il faudrait recompiler ...:-re



__
de plus il n'y avais pas d'amélioration sur :__
  * le prise en charge des mes clefs USB
  * le DHCP ne fonctionne toujours pas en WIFI


**donc retour en 7.09...**